Replace the Old Front House Doors

Jan 16th

If your front house doors are ugly and maybe even get stuck, you can even tighten them or replace them with new ones. It’s not as difficult as you might think. Get help on how to do and help with the problems that may arise along the way. Occasionally, the front house doors can see well spent out, also because they “hang”. When you open the door, springs handle no longer so that it achieves its horizontal tight position. It may also be that you are just tired of your handle and will fresh the room or the house up with new ones. Whatever your challenge there is help on the way – and it’s not so difficult to cope with handles.

Ideas Front House Doors
Ideas Front House Doors

Carefully lift off the cover. It’s not that difficult to change, for example, spring, and it is often the one who breaks off, the doors hang. To loosen the handle, first removing the pin, which sits close to the door, and hold the front house doors in check? Often it’s just an old hairpin or a nail. Turn or twist it loose and remove it with pliers. Remove the handles on both sides of the door, and also remove the screws holding the plate with keyhole.

12 Photos Gallery of: Replace the Old Front House Doors

Image of: Ideas Front House Doors
Image of: Green Front House Doors
Image of: Luxury Front House Doors
Image of: Elegant Front House Doors
Image of: Natural Front House Doors
Image of: White Front House Doors
Image of: New Front House Doors
Image of: Decoartive Front House Doors
Image of: Black Front House Doors
Image of: Design Front House Doors
Image of: Picture Front House Doors
Image of: Best Front House Doors
 

Here we mount a modern front house doors in an old locking mechanism. As you see, is the stick too narrow, so that the handle hangs? The solution is to install a little “tap” that fill the cavity completely. Push the pin at the end of the stick. It is easiest to do when the lock is in place in the door. You may need to use a chisel to latch into place inside the locking mechanism. 4. Attach the other parts on the door. Here, we have chosen different door handles on the two sides for the sake of the space. The modern handle, there is no split. Here put the handle with a screw.